3
6193-3201
ATTENTION!
Incorrect termination of supply wires may
cause internal damage and will void warranty.
To ensure your RM-90 enjoys a long life,
double check ALL your connections with the users manual
before turning the power on.
Caution!
For continued protection against risk of fire, replace the internal module fuse only with
the same type and rating.
CAUTION:
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC Rules,
antennas used with this device must be installed to provide a separation distance of at
least 20 cm from all persons to satisfy RF exposure compliance.
DO NOT:
… operate the transmitter when someone is within 20 cm of the antenna
… operate the transmitter unless all RF connectors are secure and any open connectors
are properly terminated.
… operate the equipment near electrical blasting caps or in an explosive atmosphere
All equipment must be properly grounded for safe operations.
All equipment should be serviced only by a qualified technician.
