46
6193-3201
Network A Settings
Client Bridge Settings
IP Address 192.168.0.17
Gateway IP 192.168.2.51
Subnet Mask 255.255.255.0
Ethernet IP 192.168.2.50
Gateway IP 192.168.0.1
Subnet Mask 255.255.255.0
Wireless IP 192.168.2.50
Subnet Mask 255.255.255.0
Access Point Router Settings
Network B Settings
Gateway IP 192.168.0.1
IP Address 192.168.2.201
Ethernet IP 192.168.0.191
Subnet Mask 255.255.255.0
Subnet Mask 255.255.255.0
Gateway IP 192.168.2.51
Wireless IP 192.168.2.051
Subnet Mask 255.255.255.0
In the Network A PC a routing rule is to be set.
This will allow Network A & B to have access to each other. This is entered under cmd
prompt.
Route ADD 192.168.2.0 MASK 255.255.255.0 192.168.0.191
This says access everything on network B (192.168.2.0) with the Mask of 255.255.255.0
on Network A via the Ethernet IP Interface 192.168.0.191
IP Address 192.168.2.0 will allow everything on this network to be shared by the router.
When adding a routing table you will need to enter this in. Once entered in the Router
will determine whether to pass information over the router if it is addressed to do so or
not. For added security MAC address filtering could be added as mentioned earlier in
