27
6643-22701
Mounting
This product should be mounted on 35 mm DIN-rail, which is horizontally mounted
inside an apparatus cabinet or similar. It is recommended that the DIN-rail is connected
to ground. Snap on the product to the DIN-rail according to the figure.
Removal
Cooling
This product uses convection cooling.
To avoid obstructing the airflow
around the product, use the following
spacing rules. Minimum spacing 25 mm
(1.0 inch) above / below and 10 mm
(0.4 inches) left / right the product.
Spacing is recommended for the use of
product in full operating temperature
range and service life.
10mm
10mm
This product has an integrated DIN-clip. To remove the product, press down the support
at the back with a screwdriver and lift it off the DIN-rail.