21
6643-22701
SFP Transceivers
The product supports UL and IEC certified transceivers only. See Westermo's modular
transceivers datasheets 100 Mbit and 1 Gbit for supported SFP transceivers, which
can be downloaded from the product support pages at www.westermo.com/support/
productsupport.
Each SFP slot can hold one SFP transceiver. See "Transceiver User Guide 6100-0000"
for transceiver handling instructions, which also can be downloaded from the product
support pages at www.westermo.com/support/product-support.
In the event of contamination, the optical connectors in the SFP transceivers should only
be cleaned by the use of forced nitrogen and some kind of cleaning stick. Recommended
cleaning fluids are methyl-, ethyl-, isopropyl- or isobutyl alcohol, hexane or naphtha
Supported transceivers
Firmware prior to 4.4.0 accepts Westermo branded transceivers only. From 4.5.0 other
transceivers are accepted with a notice and the product will no longer be UL approved.
Temp.specifications are also depending on the used transeivers.
Note:
To comply with UL 62368-1 only UL recognized SFP transceivers should be used.
CAUTION - HANDLING OF SFP TRANSCEIVERS
SFP transceivers are supplied with plugs to avoid contamination
inside the optical port. They are very sensitive to dust and dirt. If
the fibre is disconnected from the product, the protective plugs
on the transmitter/receiver must be connected. The protective
plugs must be kept on during transportation. The fibre optics
cables must be handled the same way.
Deviations
With copper transceiver
1100-0148 the specified operating temperature on Lynx is 0 to
+50ºC (32 to +122°F). FRNT reconfiguration times can not be guaranteed with copper
transceivers.
