28
6643-22701
Getting Started
This product runs Westermo Operating System (WeOS) which provides several
management tools that can be used for configuration of the product.
• WeConfig tool
This is a custom Westermo tool used for discovery of attached Westermo products.
• Web
Configuration of the product using the web browser.
• CLI
Configuration of the product via the Command Line Interface.
Username:
admin
Password:
westermo
If the computer is located in the same subnet as the switch you can easily use a web
browser to configure the product. Within the web you can configure most of the
available functions.
For advanced network settings and more diagnostic information, please use the CLI.
Detailed documentation is available in the chapter
”
The Command Line Management
Tool
”
in the WeOS management guide.
Factory default
IP address:
192.168.2.200
Netmask:
255.255.255.0
Gateway:
Disabled
Note!
If you are not sure about the subnet - consult your network administrator.
Configuration
Configure the product via web browser
The product can easily be configured via a web browser. Open the link
http://192.168.2.200 in your web browser, and you will be prompted with a login screen,
where the default settings for username and password are:
Username:
admin
Password:
westermo
Once you have logged in, you can use the extensive integrated help function describing
all configuration options. Two common task when configuring a new switch is to assign
appropriate IP settings, and to change the password of the admin account.
The password can be up to 64 characters long, and should consist of printable ASCII
characters (ASCII 33-126); 'Space' is not a valid password character.
Note
Version of WeConfig tool must be 10.4.0 or higher.
