52
17 After operation
17
After operation
After operation of the CM2 PRO, it must be stored properly: When storing
the machine, the following points must be observed:
P
The CM2 PRO must be placed in such a way that it can not tip over or
fall down.
P
At the storage site, the ambient conditions must meet the required
conditions (see technical data).
P
The machine, which does not have sufficient protection itself, must
be protected against the effects of the weather and corrosive
substances if these can impair safety.
If the machine is to be shut down for a long time, it may be necessary
to take preservation measures to prevent corrosion and other damage.
17.1 Dismantling / Disposal
Disassembly/disposal should be carried out by a specialist. Using spe-
cialists in the recycling and waste management sectors ensures that
waste is disposed of correctly and recycled. The raw materials of the
CM2 PRO must be sorted according to disposal type and material. The
copper-containing components such as cables can be recycled. Equip-
ment such as fuses, capacitors, regulators, etc. must be disposed of as
electronic waste, these must not be disposed of with household waste
in order to prevent environmental damage. The support frame and the
protective covers can be recycled as metal scrap.