Westell PS51080, Руководство пользователя

Страница: 25 / 50

WESTELL.COM
© 2016 Westell Technologies 20 April 2016 Doc. No. 030-300736 rB
1.877.844.4274 Page 25 of 50
5.7 Connecting to the Alarm Relay Panel
Use the provided Alarm Relay Serial Cable to connect the PS51080 Public Safety Repeater to the alarm relay panel. If
the provided cable is not long enough for your system, you will need to build one.
1. Strip the outer serial cable insulation back to expose the inner conductors, Figure 5-4. Only the
red, black and brown conductors will be used. You may cut the remaining conductors back to
end of the outer insulation to keep them out of the way.
2. Strip back the insulation on the ends of each conductor.
Figure 5-4: Stripped Cable Conductors
3. Remove the protective cover on the Alarm Relay 9 position D-Sub connector.
Figure 5-5: Alarm Relay 9 Position D-Sub Connector