Section 311-580-20B
030-101527 Rev. B
20
0407IBRB
Figure 23. Set Clock Menu Screen (Typical)
Westell B90-311580
CLEI: T1S1ABTAAA
SET CLOCK
Current Time
08/28/2003 11:50:23
New Time
08/25/2003 09:50:00
Use <tab> to select field, <return> to save, or <Esc> to return to main menu
Figure 24. ALARM THRESHOLDS Screen
Westell B90-311580
CLEI: T1S1ABTAAA
ALARM THRESHOLDS
PARAMETER
15-MINUTE
1−DAY
>
ES-L
25
250
SES-L
4
40
ESP-P
25
250
SESP-P
4
40
UASP-P
10
10
SELECTIONS
S) SAVE
D) SET DEFAULT THRESHOLDS
X) DISABLE All THRESHOLDS
NOTE: Setting a threshold to a value of 0 will disable it
Enter selection or ESC to go back to previous menu
2.
Event Log Report
-
Provides all provisioning information
and a complete listing of all stored Event/Alarm Log
events.
3.
Short PM Report - Provides all provisioning information,
and detailed PM information for the current 15-minute,
current hour and current day.
4.
Long PM Report - Provides all provisioning information,
and a complete listing of all PM information stored in the
unit.
Reports Screen Download Procedure
1.
Select Transfer," Capture Text" from the Hyper Terminal
drop down menu.
2.
Enter a file name then select Start."
3.
Select a report number 1," 2," 3," or 4" to capture data
from the SEND DATA TO LOG FILE" menu.
4.
After download is complete, select Transfer," Capture
Text," and Stop" from HyperTerminal.
9.2.10
NOTE PAD Screen
The Note Pad screen provides a means for Craft personnel to log
notes about the circuit. See Figure 26. Each entry is date and
time stamped for future reference. Up to 15 notes can be en-
tered, with each note limited to 50 characters. Add, delete, and
edit selections allow the user to manage entries.
9.3
Remote Provisioning and Query via TL1
The NIU is capable of being provisioned and queried via TL1
commands. These TL1 commands and responses are trans-
ported via the Facility Data Link and do not require that the unit
be put in loopback. The TL1 instruction sequence is outlined in
Appendix C of this document.
9.3.1
Remote Provisioning via 16-Bit Commands
To initiate a remote provisioning session, the NIU is first put into
loopback. While in loopback, the test person sends the appropri-
ate provisioning code to the NIU. Each code consists of a 16-bit
pattern and can be unframed, SF or ESF framed. All codes must
be sent to the unit for minimum of five seconds. In order to see
a bit-error response from the unit, the code must be present for
a minimum of 10 seconds. The unit will respond to the code with
