Westell PROACT 3115-80, Руководство пользователя

Страница: 15 / 26

Section 311-580-20B
030-101527 Rev. B
15
0407IBRB
Figure 15. Provisioning Menu Screen
PROVISIONING MENU
Option Current New
> Monitored Line Coding: B8ZS AMI
Monitored Framing: ESF
CPE LOS Response: AIS-CI
RAI-CI Option: ENABLED
Real Time PM mode NPRM/SPRM
CPE-to-FAC Regen: REGEN ON
CPE-to-FAC LBO: DISABLED
FAC-to-CPE Regen: REGEN OFF
FAC-to-CPE LBO: DISABLED
Loopback Timeout: 120 MINUTE
Loopback Mode NORMAL
Circuit ID: <UNASSIGNED>
SELECTIONS
S) Save D) Set to default settings
Use <tab> to select option, <space> to change, or Esc to return to main menu
Westell B90-311580 CLEI: T1S1ABTAAA
Field/Option Parameter Default* Description
Monitored Line Coding
AMI Configures unit for AMI line coding.
g
(Note 1)
B8ZS Configures unit for B8ZS line coding.
Monitored Framing
SF Monitors SF parameters for PM.
g
ESF Monitors ESF parameters for PM.
CPE LOS Response None No response to customer LOS. p
LB Enters loopback toward Network upon detecting a Customer LOS.
Idle Send Idle toward Network upon detecting a customer LOS.
AIS Send AIS toward Network upon detecting a Customer LOS.
AIS-CI Send AIS-CI toward Network upon detecting a Customer LOS.
RAI-CI Option Enabled Converts customer RAI to RAI-CI if also receiving a valid network signal. p
Disabled RAI from CPE is always passed unchanged.
Real-Time Mode None Disables real-time reporting.
NPRM Configures the unit to send NPRM messages.
SPRM Configures the unit to send SPRM messages.
SPRM/NPRM Configures the unit to send both SPRM and NPRM messages.
CPE-to-FAC REGEN
Regen Off No regeneration in the CPE-to-FAC (Z-A, XMT) path.
Regen On Regeneration in the CPE-to-FAC path.
CPE-to-FAC LBO Disabled Select this option to disable the CPE-to-FAC LBO.
7.5 dB Select this option to select 7.5 dB of LBO.
15 dB Select this option to select 15 dB of LBO.
22.5 dB Select this option select 22.5 dB of LBO.
AB15 dB Select this option if the Auto Binder level of the cable is 15 dB.
AB22.5 dB Select this option if the Auto Binder level of the cable is 22.5 dB.
FAC-to-CPE REGEN Regen Off No regeneration in the FAC-to-CPE (A-Z, RCV) path.
Regen On Regeneration in the FAC-to-CPE path (0 dB DSX hand-off).
FAC-to-CPE LBO
Disabled Select this option to disable the FAC-to-CPE LBO.
7.5 dB Select this option to select 7.5 dB of LBO.
15 dB Select this option to select 15 dB of LBO.
Loopback Time-out
Disabled Loopback will not time-out.
p
20 Minute Loopback will automatically time-out 20 minutes after initial activation.
60 Minute Loopback will automatically time-out 60 minutes after initial activation.
120 Minute Loopback will automatically time-out 120 minutes after initial activation.
24 Hour Loopback will automatically time-out 1440 minutes after initial activation.
Loopback Mode
Normal Unit loops up to normal inband/Data Link loopback codes.
p
Addressed Unit loops up to unique 16-bit addressed loopback code.
Circuit ID <user defined> This field can be up to 20 alphanumeric characters (user defined).
Table 7. Options and Parameters