Noran Tel
Page 2 of 16
a subsidiary of Westell, Inc
Connections
The Service Port connection requires a
standard USB cable connection from the
SiteVu remote unit to PC or laptop that
contains the serial communication software.
If the SiteVu remote unit is powered when the
USB is connected and the communication
software is running, the user can press the
<Enter> key to display the “Noran Tel SiteVu
Telnet Service Login:” screen.
The user can then type their username and
password. Even though the user is on a
Service Port connection the remote unit creates
a communication block to emulate a partial
Telnet connection to the remote unit.
Similarly, when using the Telnet option to
access the SiteVu remote unit, “Noran Tel
SiteVu Telnet Service Login:” is displayed.
At the login prompt the user can type in the
Username, press <Enter> and then the
Password, press <enter>. After 3 failed login
attempts the connection is dropped. The user
must wait a set amount of time (Security Lock
Out time) before trying to reconnect via Telnet.
After a successful login the Site Vu Main Menu
is displayed.
If 3 failed logins occur for the same username,
the username becomes locked and the failed
login attempt is logged in the security menu. A
user-definable lock message and user-
definable lockout time can be set in the
Security Menu. A user that has access to the
Security menu can unlock all locked users.
More information about this can be found in the
security menu.
Note:
The factory default username and password is
Norantel
. Both
the password and username are case sensitive.
Note:
T his assumes a user has already configured the Ethernet
settings, enabled the Telnet option, setup a username and password on
the selected SiteVu remote unit for this connection to be allowed.
Note:
Only four Telnet connections are allowed to connect to the
SiteVu remote unit at one given time.
Note:
The SiteVu remote unit will disconnect an idle connection
(Telnet or Service Port) once the Inactivity Timeout setting in the
Telnet menu is achieved.
