WESTELL.COM
Page 12
Remote RMM-700 Installation Guide
Installation
1-800-377-8766
to the module via the standoff posts with a minimum of twisting. Secure each
terminal with a lock washer and a nut as shown in Figure 1-4.
Figure 1-4
The installer secures an antenna terminal in the front of Remote RMM-700
with a lock washer and nut.
5. Connect the module lead labeled “Main” to the opening marked on the Remote
cover as “TX/RX,” and connect the lead labeled “Aux” to the opening labeled
“Diversity.”
6. As shown in Figure 1-5, insert the end of the phone module opposite the leads into
the module socket on the motherboard. Next, press down the other end of the
phone module until it locks in place.
Figure 1-5
The installer inserts the non-lead end of the phone module into its socket,
above left, and then snaps the module into place, above right.
