12
2.8. Combustible Dust
The smoothwall bin has been designed for safe use in areas where hazards due to combustible
dust may potentially occur. To fully minimize the risk of a dust explosion:
• Clean up dust deposits after operation of the equipment.
• Always purchase replacement parts from the manufacturer or authorized dealer/distributor.
Original manufacturers parts are designed with explosion proof features.
• Follow the maintenance schedule to keep equipment operating at normal conditions. This
will further help to prevent the risk of components overheating or wearing out which may
lead to explosion risks.
• Do not use anything inside the bin that may produce a flame, such as a match, a lighter, or
anything that may produce a shower of sparks, such as a grinder or power saw, unless the
air is free of dust and all dust deposits have been removed from the work area, or the work
area is wet such that dust cannot be dispersed in the air and smoldering processes from
sparks cannot develop.
2.9. Ladder Safety
• Do not climb ladder if damaged, wet, icy, greasy, or slippery.
• Remove slippery materials on platforms, rungs and gripping
surfaces.
• Maintain good balance by having at least three points of
contact at all times.
• Safety harnesses and climbing equipment are required.
Consult local safety authorities.
2.10. Work Area Safety
• Have another trained person nearby who can shut down the smoothwall bin in case of accident.
• The work area should be kept clear of bystanders.
• Keep the work area clean and free of debris.
2.11. Drives and Lockout/Tagout Safety
Inspect the power source(s) before using and know how to shut down in an emergency.
Whenever you service or adjust your equipment, make sure you shut down your power
source and follow lockout and tagout procedures to prevent inadvertent start-up and
hazardous energy release. Know the procedure(s) that applies to your equipment from the
following power sources.
For example:
WARNING
• De-energize, block, and dissipate all sources of hazardous energy.
• Lock out and tag out all forms of hazardous energy.
SMOOTHWALL BIN
Содержание Magnum Series
