29
Figure 9.
Nicks in Painted Surface
1. Clean the damaged area with a clean cloth.
2. Depending on the depth of the damage, sand the surface with a medium-grit abrasive pad or 180-grit
sandpaper slightly larger than the affected area until the damage is smooth to the touch.
3. Blow off debris and clean the area thoroughly.
4. Shake Westeel-approved touch-up paint can thoroughly for one minute, see
.
Figure 10.
Westeel-approved Smoothwall White Touch-up Paint
5. Spray paint over the damaged area horizontally with a medium wet coat, working your way outward from
the damage. It will be necessary to coat the damaged area multiple times with a flash off/dry time in
between coats. Ensure at least 3-4 coats are applied to cover the damaged area. The length of time
between coats will depend on the temperature. Refer to spray directions on the paint can.
Note
Avoid spraying on windy days as debris may stick to the paint.
Do not apply paint when temperature is below 10°C (50°F) as the coating may have
undesired effects such as sags, lack of cure, or lack of adhesion.
6.4. Adjust the Rack and Pinion Plate
This procedure describes how to adjust the rack and pinion plate so that the maximum gap is 1/32”.
SMOOTHWALL BIN
Содержание Magnum Series
