8
198930 R4
• Read operator’s manual and all safety decals
before assembling, using, or servicing bin.
• Close/latch all access doors when not in use.
• Do not alter or modify bin structure.
• Replace any damaged components only with
factory made components.
• This bin should only be used to store free
flowing, granular material, unless specifically
designed and marked otherwise.
• When filling, use top filler cap and direct
material to center of bin.
• Do not over-fill bin. Material should not be in
contact with or place pressure on roof sheets.
SAFETY INSTRUCTIONS
WARNING
Part Number: 8110–00012
WARNING
Never enter the bin when loading or
unloading grain.
If you must enter the bin:
1. Shut off and lock out all power.
2. Use a lifeline, safety harness, and have an
observer outside before entering the bin.
3. Wear proper breathing equipment or a respirator.
4. Avoid the center of the bin.
Failure to heed these warnings could result
in serious injury or death.
ENTRAPMENT HAZARD
Part Number: 8110–00013
WARNING
Keep clear of all augers. DO NOT ENTER this bin!
If you must enter the bin:
1. Shut off and lock out all power.
2. Use a safety harness and safety line.
3. Station another person outside the bin.
4. Avoid the center of the bin.
5. Wear proper breathing equipment or respirator.
Failure to heed these warnings could result in serious injury or death.
Rotating flighting could
kill or dismember.
Flowing material could
trap and suffocate.
Crusted material could
collapse and suffocate.
Part Number: 8110–00112
2. SAFETY
FULL FLOOR AERATION SYSTEM (WITH WELDED SUPPORTS) – 14’ & 19’ STANDARD
CORR GRAIN BINS
