Confidential
Page 24
Step 5: Include Channel in Output
The last step is to include the new
source channel in the output
transport. Navigate to the Outputs
tab and click on the
icon for the
output you wish to include the
channel. Before making
changes, you may want to
check the Overview Output
page to make sure your
transport has sufficient
bandwidth to support the
new channel. The Utilization
and Bitrate fields show this.
For example, a 38 Mb/s
transport that is 50% utilized
has 19 Mb/s unused and
available for new
programming content.
Back to the Outputs page. Select
and then click on the
icon for the Source you wish to
include in the output. A dialog box will appear. For most installations the default selection is the
simplest. Experts
may want to change
some of the
signaling. Signaling
is used by the TV to
display information
about the channel
you have selected.
Perhaps the short
Name of the
channel (WXXX-DT) or the virtual channel number to display 19-2.
Experts may want to override the defaults. More information
about this is available in the Outputs section of the main
document.
Be sure to click OK and then click Save to save the
changes to your Output.
