Confidential
Page 19
FlexDM remote management: West Pond’s
remote management allows authorized
personel to access the web UI of this, and
other West Pond devices, via a cloud hosted
web service. If authorized, West Pond can also
used this for support. Communications for this
feature utilize UDP port 1194 and TCP/IP port
443 for communication. All communications
are between the device and the flexdm.net
subnet. If the MX-100 has internet access and
this feature is enabled, green check marks
should exist on the Web UI next to Enabled,
Registered, and Online. If you wish to disable this feature, click on the gear
and select Enabled/No.
The “Nonce” value is used during provisioning to identify this device and validate that it is in the hands
of the owner. For more information on creating a FlexDM remote management contact West Pond
sales or technical support.
Accounts
There are three preconfigured accounts for managing the MX-100. This page allows the administrator
to set the passwords for these three accounts. Use the User pulldown to select the user and then enter
the new passwords. If you have lost your password, contact West Pond technical support for assistance
in accessing the device WebUI.
Log
The Log page provide insight into status changes and errors that may occur at both the system and
software level in the MX-100. This is most useful when presentations are not functioning as expected.
Check this log for clues. Note: Some warnings and errors may exist in the log during normal operation.
Info
Make, model, serial number, etc.
