E - 7
To turn Weather Alert Watch on or off, press and hold
CALL-MEnU
while the radio is idle. Select
Setup
and then
WX Alert
Mode
. Turn the
PUSH/EnTER
knob to choose
On
or
Off
, and press
PUSH/EnTER
to select.
normal mode with Triple and Dual Watch
If you activate Triple Watch while operating in normal mode, the radio checks channels 16 and 9 every 2 seconds; with Dual
Watch turned on, the radio only checks channel 16. The radio will not check channels 16 or 9 while you are actively
transmitting; it waits until your transmission is finished and then checks the channels.
Press and hold
16/9-TRI
(on the radio or the microphone) for 2
seconds to turn Triple/Dual Watch on or off. (To change between
Triple or Dual Watch, see page 11.)
normal mode with both Weather Alert and
Triple/Dual Watch
You can activate Weather Alert Watch and Triple/Dual Watch
at the same time. The radio performs both checks at their scheduled
time.
scan Mode
You can save channels into memory and then use scan mode to
monitor those channels. When the radio detects a signal on a channel, it pauses on that channel as long as the signal is
received; when the transmission stops, the radio will continue scanning.
In scan mode, the radio displays the information
shown to the right (not all indicators display at the
same time).
Using the radio in scan mode
•
You cannot transmit while in scan mode.
•
You must have 2 or more channels in memory
to start a scan.
•
To save a channel into memory, select the
channel, then press and hold
WX-MEM
for 2
seconds.
MEM
will show on the display.
•
To remove a channel from memory, set the radio to that channel, then press and hold
WX-MEM
for 2 seconds.
MEM
will
no longer show on the display.
•
To activate scan mode, press and hold
STEP/SCAn
. Press and hold
STEP/SCAn
again to return to the previous mode.
•
When the radio automatically stops on a channel, turn the
PUSH/EnTER
knob clockwise to leave that channel and
resume scanning.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while operating in scan mode, the radio checks the most recently-used weather channel
every 7 seconds, then continues scanning the next channel in memory.
To turn Weather Alert Watch
on or off, press and hold
CALL-MEnU
while the radio is idle. Select
Setup
and then
WX Alert Mode
. Turn the
PUSH/EnTER
knob to choose
On
or
Off
, and press
PUSH/EnTER
to select.
Scan mode with Triple and Dual Watch
If you activate Triple Watch while operating in scan mode, the radio checks channels 16 and 9 every 2 seconds, then goes on
to scan the next channel; with Dual Watch turned on, the radio only checks channel 16.
09 16
09 16
09 16
Every 2 seconds, the radio
checks channels 9 & 16.
Triple
Watch
Monitoring Channel 25
WX
WX Alert
Watch
Every 7 seconds, the radio checks
the last-used weather channel.
09 16
09 16
09 16
Every 2 seconds, the radio
checks channels 9 & 16.
Triple
Watch
Monitoring Channel 25
1 Watt USA
MEM
Scanning Channels
01A,05A,06,07A,08
07
A
Transmit power
last used
Channel mode (
USA
,
CAN
adian,
or
INT
ernational)
Current channel
being scanned
Scan list (if the
text is too long,
the line scrolls)
All scanned
channels must
be in memory
Normal scan
mode or Triple/
Dual-watch on
Status icons
