7
3
3. While another person holds the Upright (13)
near the Frame (1), connect the Extension Wire
(23) to the Wire Harness (60). Next, connect the
Resistance Cable (19) to the Lower Cable (29)
in the following way:
•
See drawing A.
Pull upward on the metal
bracket on the Lower Cable (29), and insert
the tip of the Resistance Cable (19) into the
wire clip inside the metal bracket as shown.
•
See drawing B.
Firmly pull the Resistance
Cable (19) upward and slide it into the top of
the metal bracket as shown.
•
See drawing C.
Using pliers, squeeze the
prongs on the upper end of the metal bracket
together.
Push the Wires (23, 60) and the Cables (19, 29)
downward into the Frame (1).
Tip: Avoid pinching the wires and cables.
Insert the Upright (13) into the Frame (1). Attach
the Upright with three M8 x 16mm Patch
Screws (34) and three M8 Split Washers (42).
Avoid pinching the
wires and cables
42
60
19
29
42
34
23
13
1
34
A
B
C
29
19
19
Metal
Bracket
Metal
Bracket
29
Meijer.com
