ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the
included hex keys, assembly requires a phillips screwdriver
, an adjustable
spanner
, and a rubber mallet
.
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 14. The second number refers to the quantity used in assembly.
Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
5
M8
Washer (48)–4
M8 Split
Washer (59)–6
M8 Nylon
Locknut (38)–8
M10
Washer (35)–2
M4 x 16mm
Screw (42)–5
M10 x 25mm
Patch Screw (22)–2
M6 x 48mm Flat Head
Screw (36)–4
Pedal Arm Bolt Set (40)–2
M8 x 38mm Button Bolt (50)–4
M8 x 25mm Button
Screw (45)–1
M8 x 19mm Button
Screw (68)–6
M8 x 53mm Button Bolt (34)–4
1. Identify the Front Stabiliser (10), which is narrower than
the Rear Stabiliser (not shown). Whilst another person
lifts the front of the Frame (1), attach the Front
Stabiliser to the Frame with two M8 x 53mm Button
Bolts (34), two M8 Washers (48), and two M8 Nylon
Locknuts (38).
10
38
34
1
48
48
1
All manuals and user guides at all-guides.com
