9
9. The Console (23) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents.
Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover.
Make sure to orient the
batteries as shown by the diagram inside
the battery compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the front
cover of this manual. To avoid damaging the
console, use only a manufacturer-supplied
AC adapter.
Plug one end of the AC adapter
into the jack on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.
23
Batteries
Batteries
Battery
Cover
9
8. While a second person holds the Console Plate
(75) near the Upright (2), insert the Wire
Harness (73) and the Pulse Wires (84) upward
through the Console Plate.
Tip: Avoid pinching the wires.
Attach the
Console Plate (75) to the Upright (2) with two
M6 x 13mm Patch Screws (81).
8
75
81
2
73, 84
Avoid pinching
the wires
