Werock Scoria M240, Руководство пользователя

Страница: 93 / 120

Scoria M240 User Manual
93 / 120
LED Indicator
Status Meaning
LED light off The Scan Trigger Handle is not switched on
LED light on The Scan Trigger Handle is successfully connected to the device
LED light flashing (1
sec. interval) The Scan Trigger Handle is switched on, but not yet successfully connected
to your device
LED light flashing
(0.5 sec interval) The Scan Trigger Handle is in pairing mode and can be connected to a new
device.
Pairing
1.
Make sure that Bluetooth is activated on your device. You can recognize this by the small Bluetooth
symbol next to the battery display. 2.
2.
Start the pairing mode of the Scan Trigger Handle by first pressing the Scan Trigger (2) and then the
on/off switch (1). The LED starts to flash quickly. Keep the Scan Trigger pressed until the LED
flashes more slowly. 3.
3.
Open the Bluetooth settings of your device and select "BLE_Handle". After successful connection,
the LED of the Scan Trigger Handle lights up continuously.
4.
Finally, the handle must be connected in the scanning app by activating the "Bluetooth Handle
Open" function under "Settings":