Automatic sauna splash system, type Sauna Plus 8 Basic
Index: 02
Date modified: 22/02/2022
OI No.: BA DW 010-02 Sauna Plus 8 Basic EN.docx
Page 18 of 36
2.
Push the yellow roller carrier onto the axle.
3.
Insert the hose bracket into the housing's guides until it firmly snaps
into place.
4.
Turn the roller carrier clockwise while carefully pushing the hose into
the housing until the entire hose is contained in the housing.
Now replace the safety disc and the transparent pump cover. This com-
pletes the installation of the roller carrier.
For dismantling the roller carrier and the hose bracket, please proceed in the reverse sequence.
Plug the safety plug in a corresponding power socket and turn on the device at the main switch.
If the switch-on delay is activated, the first splash can be delayed between 0-120 minutes after switching
on the voltage. This prevents the splash from being made on the cold sauna heater. After that, the
splashes take place according to the set cycle or after a push button prompt.
Ensure that all installation tasks have been completed. Observe the sequence of the commissioning works.
The device is now ready for operation.
Figure 14,
Insert roller carrier
Figure 15,
Insert the hose bracket
Figure 16,
Turn the roller carrier
