Werner & Weber MPC-A, Руководство по эксплуатации

Страница: 6 / 28

13. Note before machine cleaning:
13.a. Handle all process materials with care. Do not use any inflammable liquids for machine cleaning.
13.b. Close, seal or remove all apertures through which no water/cleaning liquid must penetrate during
cleaning with water or water vapour (high pressure cleaner).
14. Note before machine operating:
14.1. Use appropriate hoists (as per DIN 30722 German Industrial Standard). All loads must be carefully
attached to the hoists.
CAUTION
Do not exceed the maximum permissible total weight of 12 t (MPC-A) or
15 t (MPC-K, MPC-L) !
DANGER
During the operation of hoists, it is strictly forbidden to stand or work
beneath them.
Always wear gloves when working with metal ropes.
14.2. Inexperienced personnel must never be authorized to perform loading or give directions to crane or
truck drivers. When giving directions, remain within each other´s sight or hearing.
14.3. The machine must always be supported in such a way that weight transfers do not cause
unsteadiness. Avoid that steel rests on steel.
14.4. For maintenance/repair works above body height, adequate ladders and/or platforms are necessary.
Never use machine parts for climbing. All handles, steps, rails, platforms, ladders, and the like must
be kept clean and free from dirt, grease/oil, snow, and ice.
15. Do not effect any modifications on the machine, such as rebuilding or adding-on, without the
supplier´s prior approval. This also applies to the mounting and adjustment of safety installations
and -valves and to the welding of supporting structures.
16. Danger- and information signs:
at the chargebox at the discharge door
Page 05
issue january 2003
CLEAN CHARGEBOX
EVERY WEEK
DISCONNECT FROM
POWER SUPPLY BEFORE
OPENING THE FLAP
CHARGEBOX
DANGER OF LIFE
DO NOT ENTER!
CUT OFF POWER PRIOR TO
ANY MAINTENANCE WORK!
DANGER
KEEP CLEAR OF
THE DOOR
WHEN FLAP
OPENS!
WERNER WEBER