Werk-Brau EZG Series Скачать руководство пользователя страница 9

Страница: 9 / 12

INST-EZG-D

HYDRAULIC INSTALLATION

EZG-SERIES

Created: 7/22/13

Document:

Page 9 OF 10

INST-EZG-D

7. Now, lift the cylinder upward until the mount bracket is firmly against the

bottom of the stick. A wedge can be lodged between the grip and the cylinder

to hold the mount snuggly against the stick. CYLINDER SHOULD BE

ALMOST PARALLEL TO THE STICK.

8. Disconnect battery before doing any welding. Center the mount bracket on

the stick, re-check clearances at the grip and tack weld the mount bracket to

the stick, on the sides only. NOTE: Finish welding bracket after the

hydraulics are connected and the grip is functioning. (See Welding

Instructions)

9. Locate the grip stop. Identify where grip is hitting on stick and mark, when

Grip is up against stick. Weld stop along sides only into place.

10. Locate bolt or pivot pin retaining rod and install.

a. Pivot pin with not cross hole: A retaining rod should be welded to the

coupler, if no coupler then the bucket. (This piece is a round simple

bar)

b. Pivot Pin with a cross hole: Bolt should be installed in coupler or

bucket pin retainer

NOTE: Thumb pin should not spin with thumb!

Should be retained

to bucket or coupler

11. Install the two “caution” decals in clear visibility of the operator.

You are now ready to install the hydraulics to the EZ Grip. If you are using an auxiliary

hydraulic system supplied by the machine’s manufacturer, follow their instructions carefully.

Remember to limit the working pressure to a specified maximum pressure.

Содержание EZG Series













Результаты поиска

Содержание EZG Series

Отзывы:

Похожие инструкции для EZG Series

Бренды по названию

Популярные бренды

Werk-Brau EZG Series, Руководство по продукту и комплект для установки

Результаты поиска

Содержание EZG Series

Отзывы:

Похожие инструкции для EZG Series

Бренды по названию

Популярные бренды