Werk-Brau EZG Series, Руководство по продукту и комплект для установки

Страница: 4 / 12

4 INST-EZG-D
SAFETY
EZG-SERIES
Created: 7/22/13 Document: Page 4 OF 10
INST-EZG-D
GENERAL SAFETY PRECAUTIONS - CONTINUED
USE CARE WITH HYDRAULIC FLUID PRESSURE
Hydraulic fluid under pressure can penetrate the skin and cause serious injury or death.
Hydraulic leaks under pressure may not be visible. Before connecting or disconnecting
hydraulic hoses, read your operating machines operator’s manual for detailed instructions on
connecting and disconnecting hydraulic hoses or fittings.
• Keep unprotected body parts, such as face, eyes, and arms as far away as possible from a
suspected leak. Flesh injected with hydraulic fluid may develop gangrene or other permanent
disabilities. Wear safety glasses, protective clothing, and use a sound piece of cardboard or wood
when searching for hydraulic leaks. DO NOT USE YOUR HANDS!
• If injured by injected fluid, see a doctor at once. If your doctor is not familiar with this type of injury,
ask him to research immediately to determine proper treatment.
DO NOT MODIFY MACHINE OR ATTACHMENTS
Modifications may weaken the integrity of the attachment and may impair the function, safety,
life and performance of the attachment. When making repairs, use only the manufacturer’s genuine
parts, following authorized instructions. Other parts may be substandard in fit and quality. For loaders,
never modify any ROPS (Roll Over Protection System) equipment or device.
!!!Any modifications must be authorized in writing by the Werk-Brau or the manufacturer!!!
SAFELY OPERATE EQUIPMENT
Do not operate equipment until you are completely trained by a qualified operator in how to
use the controls, know its capabilities, dimensions, and all safety requirements. See your
operating machines manual for these instructions.
• Keep all step plates, grab bars, pedals, and controls free of dirt, grease, debris, and oil.
• Be sure that all bystanders are out of harms way when operating.
• Do not allow riders on the attachment or operating machine
• Do not operate the equipment from anywhere other than the correct operators position.
• Never leave equipment unattended with the engine running or with this attachment in a raised
position.
• Do not alter or remove any safety feature from the operating machine or this attachment.
• Know your work site safety rules as well as traffic rules and flow. When in doubt on any safety issue,
contact your supervisor or safety coordinator for an explanation.
SAFELY MAINTAIN AND REPAIR EQUIPMENT
• Do not wear loose clothing, or any accessories that can catch in moving parts. If you have
long hair, cover or secure it so that it does not become entangled in the equipment.
• Work on a level surface in a well-lit area.
• Use properly grounded electrical outlets and tools.
• Use the correct tool for the job at hand. Make sure tools are in good condition.
• Wear all protective equipment specified by the tool manufacturer.