Werk-Brau EZG Series, Руководство по продукту и комплект для установки

Страница: 3 / 12

3 INST-EZG-D
SAFETY
EZG-SERIES
Created: 7/22/13 Document: Page 3 OF 10
INST-EZG-D
SAFETY STATEMENTS

Danger tags are used in major hazard situations where an immediate hazard presents a
threat of death or serious injury to operator and anyone about.

Warning tags are used to represent a hazard level between “Caution” and “Danger”,
instead of the required “Caution” tag, provided that they have a signal word of “Warning,” an
appropriate major message.

Caution tags are used in minor hazard situations where a non-immediate or potential
hazard or unsafe practice presents a lesser threat of injury.

A notice label is used where equipment or property damage could result if the instructions
are not followed properly.

This symbol by itself or used with a safety signal word throughout this manual is used to
call your attention to instructions involving your personal safety or the safety of others. Failure
to follow these instructions can result in injury or death.
GENERAL SAFETY PRECAUTIONS
READ MANUAL PRIOR TO INSTALLATION
Improper installation, operation, or maintenance of this equipment could result in serious
injury or death. Operators and maintenance personnel should read this manual as well as all manuals
related to this equipment and the operating machine thoroughly before beginning installation,
operation, or maintenance. FOLLOW ALL SAFETY INSTRUCTIONS IN THIS MANUAL AND THE
OPERATING MACHINES MANUAL.
READ AND UNDERSTAND ALL SAFETY STATEMENTS
Read all safety decals and safety statements in all manuals prior to operating or working on
this equipment. Know and obey all OSHA regulations, local laws and other professional guidelines for
your operation. Know and follow good work practices when assembling, maintaining, repairing,
mounting, removing or operating this equipment.
KNOW YOUR EQUIPMENT
Know your equipment’s capabilities, dimensions and operations before operating.
Visually inspect your equipment before you start, and never operate equipment that is not
in proper working order with all safety devices intact. Check all hardware to assure it is
tight. Make certain that all locking pins, latches, and connection devices are properly installed and
secured. Remove and replace any damaged, fatigued or excessively worn parts. Make certain all
safety decals are in place and are legible. Keep decals clean, and replace them if they become worn
and hard to read.
PROTECT AGAINST FLYING DEBRIS
Always wear proper safety glasses, goggles with a face shield when driving pins in or out or
when any operation causes dust, flying debris, or any other hazardous material.
LOWER OR SUPPORT RAISED EQUIPMENT
Do not work under raised booms without supporting them. Do not use support material
made of concrete blocks, logs, buckets, barrels or any other material that could suddenly collapse or
shift positions. Make sure support material is solid, not decayed, warped, twisted, or tapered. Lower
the boom(s) to ground level or onto block(s). Lower the boom(s) and attachment(s) to the ground
before leaving the cab or operator’s station.