Hourly Report : In idle mode, Press Shift key and then H key
Duplicate Bill Report : In idle mode, Press Shift key and then I key
UDF itemwise report : In idle mode, Press Shift key and then J key
KOT Pending Report : In idle mode, Press Shift key and then L key
Deleted KOT report : In idle mode, Press Shift key and then M key
Returned Item report : In idle mode, Press Shift key and then N key
Daywise Report : In idle mode, Press Shift key and then O key
Monthly Report : In idle mode, Press Shift key and then P key
Yearly Report : In idle mode, Press Shift key and then Q key
UDFwise Report : In idle mode, Press Shift key and then R key
9.0 PRODUCT SPECIFICATION
Printing Method: Thermal line dot method
Printing speed : 50 mm/s at 7.2V drive or 10 bills/min
Dot Density : 203 dpi × 203 dpi
Resolution : 8 dots/mm
Character size : 12 * 28
Printing direction : Bi- directional in both text and graphics
Reliability of print head : 50 km
Sensors : Paper sensor, Platen sensor, Hot mode sensor.
Mechanical:
1. Sheetmetal lowercase and top case to hold ECR main Pcb, other pcb's, keyboard LCD.
2. Integrated keyboard withm 59 no. of active keys
3. Fixed LCD and 7 segment display
Dimensions and weigh
L*W*H : 322*263*145 mm
Weight: 3.5 Kg
ELECTRICAL:
1. Voltage : 150V to 270 V AC
2. Rated current:2.6 amp
3. Frequency: 50 Hz +/- 3 Hz.
4. Power consumption: Standby mode < 4W consumption
5. Interfaces: Serial 2 no., USB no. & LCD
Technology:
1. 2 inch thermal mechanism
2. ARM 32 bit controller
3. USB host interface
4. 2 Serial interface
Userwise report : In idle mode, Press Shift key and then S key
Ratewise Report : In idle mode, Press Shift key and then T key
TAX Report : In idle mode, Press Shift key and then U key
Above shortcuts works only for manager login or Report option should be enabled.
This is after login, machine will be in idle mode.
65
64
Tax slab Indication : In idle mode, Press Shift key and then V key
POS Enable/Disable : In idle mode, Press Shift key and then W key
HSN : In idle mode, Press Shift key and then X key
Paper path : curved paper path
Paper type : thermal roll paper
Paper width : 58±1 mm .
Paper thickness: 0.06 ± 5 microns
Paper entry: rear in and top out.
Paper roll size : Max Dia 75 mm
Environment Condition:
Temperature –
Operation 5 degree to 45 degree
Storage 0 degree to +60 degree
Humidity-
Operation: 20% to 80% non-condensation
Storage: 3% to 85% non-condensation
5. Keyboard with 59 long travel keys and 51 hot keys.
6. Graphics LCD with 192*64 resolution
7. External printer, Barcode scanner connectivity
PAPER HANDLING :
10.0 DO'S & DON'TS
DO's
¨
¨
Ensure that the Neutral-Earth voltage is less than 3 Volts AC, Improper grounding
may lead to power Adaptor & Logic Card failure.
DON'Ts
¨
Don't keep the product near source of electrical interference like loud speakers,
cordless phones, etc, which might induce noise on your equipment.
¨
Don't connect your product to the same outlets of those of large motors.
¨
Don't connect your Product to output power in case of power fluctuation, use a
Voltage Stablizer to connect your Product.
¨
Don't keep serial interface cable connected, once download operation is complete.
¨
Don't touch the LCD screen with the bare hands; it may lead stains on LCD.
¨
Don't subject the keypad to any kind of oil or liquid.
¨
Don't use alcohol or thinner to clean product/parts. Alcohol and thinner reacts with
plastic parts and damages them.
¨
Don't spill any liquid or foreign material inside the product .
¨
Don't install a product next to an Air conditioner. Move it to the other side as far
possible because it may lead to condensation of water which in turn leads to rusting
of mechanical components.
¨
Don't touch the head of Printer with anything.
¨
Don't touch the Paper cutter blade.
¨
Don't bend the power cord excessively or place any heavy objects onto it.
Please read the user manual before using the product.
11.0 LIMITATION:
In Billing mode when we press “00” key and then try to press any numeric key it will not
work until we press Cancel Key.
In item name, Other Charges, Header Footer field it should not
take character more than its max limit but it will take special character(but will not Print them)
¨
¨
