Wenglor weCat3D MLSL, Руководство по эксплуатации

Страница: 46 / 71

46 Integrated Web Server
General settings
Operating mode • Profile Sensor: The sensor functions as a 2D Profile Sensor and sends the measured
profile to the PC or the control unit.
• Smart WeCat3d: The sensor works in conjunction with the uniVision software (s.
Operating Instructions DNNF012/DNNF020) and enables thus an user-specific evalua-
tion in the sensor.
NOTE!
In the "Smart WeCat3D" operating mode, only interfaces and website defined by
the uniVision Software are available. A connection via GigE Vision,
VisionApp Demo 3D, VisionApp 360 or SDK is only possible in the "Profile sen-
sor" operating mode.
NOTE!
After changing the operating mode, the sensor is restarted.
Encoder reset Resets both encoder counters (rotary encoders) in the sensor to zero.
Reset sensor
settings Returns all settings to their default values.
Exception: Network settings.
Restart Restarting of the sensor can be forced by pressing “Restart”.
Network reset Returns the network settings to their default values (see section 6.5 )
NOTE!
If the set iP address differs from the preset address and you do not know it, you can find
the set IP address in the OLED display under the menu item "Interface".