Wenglor weCat3D MLSL, Руководство по эксплуатации

Страница: 34 / 71

34 Installation and Initial Start-Up
6.1.3 Tilting Aroung the a-Axis
Tilting should be avoided in order to obtain ideal
profile quality.
Nevertheless, thanks to their large dynamic range,
weCat3D Sensors continue to provide measured
values even in the event of tilting.
6.1.4 Tilting Around the b-Axis
Tilting should be avoided in order to obtain uniform
signal distribution for best possible profile quality.
Nevertheless, thanks to their large dynamic range,
weCat3D Sensors continue to provide measured
values even in the event of tilting.
Tightening torques must be complied with in order to assure error-free operation. The respective values are
listed in the following table.
Connection Type Tightening torque in (Nm)
Connector cable: M12 (plug 1) 0,6
Network cable: M12 (socket 2) 0,4
Mounting: M5 (threaded) 2.5 (min. thread engagement length: 6 mm)
Mounting: M4 (threaded) 1,5 (min. thread engagement length: 4 mm)
M8 mounting (thread) 15
ATTENTION!
Risk of property damage in case of improper installation!
The product may be damaged.
• Comply with installation instructions.