Wenglor P2PY1 Series, Руководство по эксплуатации

Страница: 9 / 37

9 Long-Range Laser Distance Sensors
Order No.
Technical Data
P2PY
101 109 105 103 106 107 108
Setting range 50…10.000 mm —
Measuring range — 50…10.000 mm
Switching hysteresis < 15 mm —
Current consumption
(operating voltage
= 24 V)
< 35 mA < 40 mA
Switching frequency 50 Hz * —
Response time 15 ms * —
Measuring rate — 100/s *
Acceleration Sensor Yes Yes
Connection
diagram no.
243 241 242
Connection type M12×1; 4/5-pin M12×1; 4/5-pin
Interchangeable
optical lens
— Yes — Yes —
ECOLAB Yes — Yes — Yes
FDA compliant Yes — Yes — Yes
Output function 2× PNP NO
PNP NC,
PNP NO
2× PNP NO 2× NPN NO
Analog
0–10 V
Analog
4–20 mA
MTTFd
(EN ISO 13849-1)
543,71 a 502,44 a 511,24 a
* Depends on mode, see chapter “3.4 Mode-Dependent Data” on page 10
3.2 Warm-up phase
The warm-up phase lasts 6 minutes. The switching on drift during that time can be seen in the following
diagram.
0 60 120 180 240 300
–7
–5
–6
–4
–3
–2
Time in sec.
Typ. deviation in mm
–1
Switching On Drift
360
0
NOTE!
Specifiations related to the measured value without load. For the analog versions this spec-
ification can deviate due to the load on the analog output.