14
15
Using the Chronograph (Stopwatch) Feature
The chronograph feature is a stopwatch which measures elapsed hours, minutes,
and seconds. It is also capable of measuring split-timed events (timing a continu-
ous event and sub-events simultaneously; e.g., timing an individual lap and an
entire race).
Stopwatch
1.
To start the stopwatch, press the ST/STP button in Chronograph Mode.
2.
To stop it, press the ST/STP button again.
3.
Read the seconds, minutes, and hours on the Total Time read-out.
4.
To reset the stopwatch to zero, press and hold the Reset Button.
Note:
The clock function of the watch will continue to operate while using
the stopwatch.
Chronograph Mode
Lap #
Elapsed Time
Total Time
Using the Split-Timing Function
1.
To start the stopwatch, press the ST/STP button in Chronograph Mode.
2.
To mark or record a lap or other intermediate segment of time, press the Reset
button. The Lap time will be shown for a short while. The chrono will continue
to record the lap time internally, then externally. After that, the lap number will
be increased by 1. If there are more than 10 laps, the laps over the 10th lap will
be accumulated into the 10th lap. The watch will continue to time the total
event internally while the lap time is being recorded.
After 10 Sec
Lap # increased by 1
Stopwatch Running
(no lap recorded)
Lap Display
Lap Time Recording
Stopwatch Continuous
Running
Lap Time
Total Time
