28
29
Compass Mode - Different Digital Read-outs
Normal Display
In Compass Mode, the digital read-out for the compass direction in the top row
while the bearing direction is displayed in the bottom row.
note:
Analog movement will be stopped temporarily during compass measurement.
Idle Display
If no key is pressed for 1 minute, the watch will go to the IDLE Mode automati-
cally to conserve battery power. To activate the compass again, press any button.
Distortion Display
If distortion is detected, the bearing direction will flash. Please refer to
“Calibrating the Compass” on p.39 to restore the compass to normal
operation when distortion is detected.
Distortion Display
Compass Mode Display
Normal Display
Idle Display
flashing
Distortion Display
Normal Display
Idle Display