40
41
Magnetic Declination Mode
1.
Check the previous section “Magnetic Declination in Major Cities” on
p.34-38 to choose the magnetic declination of the city which is close to
your current position. The angle will be input into the Watch during the
calibration.
2.
Press the Mode button in Rotation Calibration Display to access the
Magnetic Declination Read-out.
3.
When the current magnetic declination appears, press the ST/STP or Reset
button to increase/ decrease the value.
4.
When the setting is completed, press and hold the Mode button to confirm
the setting and exit the adjustment display.
Calibrating the Compass Cont.
1.
Press and hold the Mode button to enter the Compass Setting Mode.
2.
Press ST/STP button to start calibrating the compass. Lay the watch flat on
a table and rotate it clockwise at a slow to medium pace until the pattern
“ ” in the bottom display is completed.
3.
“Done!” will be shown when the calibration is completed.
4.
Hold the Mode button to go back to the Compass Mode or press the Mode
button once to set the magnetic declination.
Magnetic Declination
Display
Compass Calibration
Rotation Calibration
Display
Rotation Calibration
Complete Display
Rotate the Watch
Horizontally
Magnetic Declination
Display
Compass Calibration
Rotation Calibration
Display
Rotation Calibration
Complete Display
Rotate the Watch
Horizontally
Compass Calibration
Rotation
Compass
Read-out
Rotate the
Watch
Horizontally
Rotation
Calibration
Complete
Magnetic
Declination
Read-out
ST/STP
Mode
