![background image](http://html1.mh-extra.com/html/wen/msa658/msa658_instruction-manual_956485010.webp)
What’s Needed:
ASSEMBLY & ADJUSTMENTS
INSTALLING THE PEDAL ASSEMBLY
1. Attach the pedal assembly (Fig. 4 - 1) to the base us-
ing two partially threaded hex bolts (Fig. 4 - 2), two 8mm
washers (Fig. 4 - 3) and two M8 hex nuts (Fig. 4 - 4). The
wheel should be positioned inside the base assembly.
What’s Needed:
INSTALLING THE BASE
1. Attach the table top and leg assembly to the base. Se-
cure each of the four corners with two carriage bolts (Fig.
3 - 1), four 8mm washers (Fig. 3 - 2) and four M8 hex nuts
(Fig. 3 - 3). After setting the position, fully tighten all 24
bolts connecting the legs with the tabletop and the base
assembly.
NOTE:
Determine if you plan to primarily use the stand for
a planer or a miter saw. If using stand for a planer, install
the table top such that the arms will be perpendicular to the
wheels. If using stand for a miter saw, install the table top
such that the arms will be parallel to the wheels (Fig. 8).
Carriage
Bolts (8)
Washers (8)
Hex Nuts (8)
Base Assembly (1)
Pedal Assembly (1)
Hex Nuts (2)
Bolts M8x60
Partial Thread (2)
Washers (2)
Fig. 3
1
2
3
Fig. 4
1
2
3
4
10
Содержание MSA658
Страница 13: ...13 EXPLODED VIEW PARTS LIST...
Страница 16: ...THANKS FOR REMEMBERING V 2021 02 10...