Assembly instructions DMT floor mount
Parts list:
• 12mm Plywood panel 1850x3250mm (Fig.1)
• 8 pc. Mounting block type 1 (Fig. 2)
• 4 pc. Mounting block type 2 (Fig. 3)
• 76 pc. Wood screws 3.5*25 (Fig. 4)
• 5m² (z.B. 4*50mm roll of 25m EAN 4042448388704) double-sided tape
1
2
3
4
Process:
• Cover one full side of the plywood panel with the tape (e.g. in long strips).
Panel must be clean.
• Thoroughly clean the surface on which the DMT will be placed
(free from dust and grease).
• Pull the protective backing off of the tape and adhere the panel to the
clean surface.
