9
What’s Needed:
What’s Needed:
ASSEMBLY & ADJUSTMENTS
INSTALLING THE LEGS
1. Place the tabletop on the floor, install one leg to a corner
of the table top using four carriage bolts (Fig. 1 - 1), four
M8 washers (Fig. 1 - 2) and four M8 hex nuts (Fig. 1 - 3).
Repeat with all four legs. Be sure to only finger tighten the
bolts to leave room for adjustments when attaching the
base.
INSTALLING THE EXTENSION ARMS
1. Insert the extension arms (Fig. 2 - 1) into the guide
brackets on each side of the table top and secure each with
a locking knob (Fig. 2 - 2). Add a self tapping screw (Fig.
2-3) to each extension arm to act as a stop. This will pre-
vent extending the extension arms too far.
Tabletop (1)
Legs (4)
Carriage
Bolts (16)
Washers (16)
Hex Nuts (16)
Extension Arms (2)
Lock Knobs (2)
Self-Tapping
Screws (2)
Fig. 1
1
2
3
Fig. 2
1
1
2
3
Содержание MSA658
Страница 13: ...13 EXPLODED VIEW PARTS LIST...
Страница 16: ...THANKS FOR REMEMBERING V 2021 02 10...