![background image](http://html1.mh-extra.com/html/wen/61731/61731_manual_956336016.webp)
MAINTENANCE
WARNING
: Disconnect tool from air supply and empty fasteners from the magazine before perform-
ing any cleaning or maintenance.
LUBRICATION
Routine lubrication of the tool is required for best performance. An automatic in-line oiler is recommended. If
tool is used without an in-line oiler, place 5 to 6 drops of pneumatic tool oil into the air inlet of the tool at the
beginning of each workday or after about 1 hour of continuous use. Oil added through the air inlet will lubricate
the internal moving parts.
CLEANING
Keep the tool clean for better and safer performance. Wipe the tool clean with a damp towel and some soft
soap. Blow the tool clean using compressed air. Only use non-flammable cleaning solutions to wipe exterior of
the tool if necessary. CAUTION: Do not soak tool with cleaning solutions. Such solutions can damage internal
parts.
INSPECTION
1. Inspect the trigger and safety mechanism to assure the system is complete and functional (no loose or missing
parts, no binding or sticking parts). Do not operate if any portion of the tool, trigger, or safety bracket is dam-
aged, inoperable, disconnected, or altered. Any issues with the tool such as leaking air, damaged parts, or miss-
ing parts should be repaired or replaced before use.
2. Inspect the tool and make sure all screws are tight. Loose screws can cause personal injury or damage the tool.
3. All compressed air contains moisture and other contaminants that are detrimental to internal components of
the tool. Dirt and water in the air supply are major causes of pneumatic tool wear. Regularly drain water and con-
taminations out from the compressor. An air line filter is recommended to remove most of these contaminates
and prolong the life of the tool.
Follow the compressor instructions to check the filter of the air compressor.
STORAGE
Place the tool and accessories inside the blow mold case to protect it from dust and moisture. Store the unit and
accessories in a dark, dry, frost-free and well ventilated place, out of the reach of children. The ideal storage
temperature is between 50 to 86°F (10 and 30°C).
PRODUCT DISPOSAL
Used pneumatic tools contain recyclable materials and should not be disposed with household waste. Please take
this product to your local recycling facility for responsible disposal and to minimize its environmental impact.
16
Содержание 61731
Страница 18: ...EXPLODED VIEW PARTS LIST 18...