Wen 61731, Руководство пользователя, Страница: 13 / 20

PREPARATION AND ADJUSTMENTS
ADJUSTING THE DRIVING DEPTH (Fig. 7)
The depth adjustment mechanism controls the depth that the fastener
will be driven. The driving depth is set to the maximum from the fac-
tory. To adjust the driving depth:
1. Make sure to disconnect the air supply and remove fasteners from
magazine before making adjustments.
2. Loosen the depth adjustment screw (Fig. 8 - 1) using the hex key.
3. Slide the safety bracket (Fig. 8 - 2) to adjust the firing depth. Sliding
the bracket upward increases the driving depth and sliding the bracket
downward decreases the driving depth.
4. Retighten the depth lock screw.
5. Test fire on a scrap piece of wood to check the driving depth and adjust it as necessary.
NOTE:
Adjust the air pressure regulator along with the depth setting so that the desired driving depth can be
achieved with the lowest possible air pressure. This will save energy, reduce noise level and reduce the wear on
the tool.
Fig. 8
1
2
Fig. 9
ADJUSTING THE AIR OUTLET (Fig. 9)
Air will be released from the air outlet during operation. Rotate the
adjustable air outlet cap (Fig. 9) on the top of the nailer to direct the re-
leased air to your preferred direction, away from yourself and others.
13