![background image](http://html1.mh-extra.com/html/wen/61731/61731_manual_956336015.webp)
5. Connect the nailer to the air supply. Load the magazine and test fire a nail into a scrap piece of wood to con-
firm the nailer is working properly again.
WARNING:
If nails continue to jam, stop using the nailer. Contact our customer service department
at 800-232-1195 (M-F 8-5 CST).
1. Disconnect the nailer from the air supply.
2. Pull the feeder shoe all the way to the back of the magazine
until it latches. Slide fasteners to the back and remove all re-
maining fasteners from the magazine.
3. Use a pair of needle nose pliers or a flat head screwdriver to
remove the bent fastener from the back opening of the nose-
piece (Fig. 11 - 1). If the fastener cannot be removed directly,
refer to the next step to remove the magazine.
CLEARING JAMMED FASTENERS (Fig. 11 & 12)
WARNING:
Disconnect air line from the tool and remove all fasteners before removing jammed
nails to avoid personal injury. Keep the tool pointed away from yourself and others.
1
2
Fig. 12
OPERATION
Fig. 11
1
4. Remove the angle adjustment wheel and five hex screws (Fig. 12 - 1 & Fig. 12 - 2). Slide the magazine off the
nosepiece. Keep note of the orientation of each part so that you can reassemble the magazine. Remove the bent
fastener. Reattach the magazine and re-install the screws.
15
Содержание 61731
Страница 18: ...EXPLODED VIEW PARTS LIST 18...