![background image](http://html1.mh-extra.com/html/wen/48107/48107_manual_956286006.webp)
IMPACT WRENCH SAFETY RULES
WARNING:
Do not let comfort or familiarity with the product replace strict adherence to product safety
rules. Failure to follow the safety instructions may result in serious personal injury.
1. WORK ENVIRONMENT. Do not operate the tool in wet or damp conditions; doing so significantly increases
the risk of electrical shock. Do not operate the tool in the presence of flammable liquids or gases.
2. PERSONAL SAFETY. Always wear ANSI Z87.1-approved glasses, hearing protection and dust mask when us-
ing the wrench. Tie back long hair. Do not wear loose clothing or jewelry as they might get drawn in by the tool.
3. PREVENTING ELECTRIC SHOCK. Only hold the tool by insulated gripping surfaces when performing an
operation in case the drive contacts hidden wiring or its own cord. Contacting a “live” wire may make exposed
metal parts of the tool “live” and could give the operator an electric shock. Make sure to keep the drive bit away
from any power cables, extension cords or wiring during operation.
4. TOOL INSPECTION. Before operation, check the tool for any damage or missing parts. Do not use the tool
if any part is missing or damaged. Make sure all adjustments are correct and all connections are tight.
5. STANDING POSITION. Always be sure you have a firm footing. When operating the tool from an elevated
position, be aware of people or things beneath you.
6. SECURING THE WORKPIECE. Secure loose workpieces using vises or clamps to prevent wobble, damage
to the workpiece, and personal injury.
7. DURING OPERATION. To prevent injury, use both hands to operate the impact wrench, placing one hand
on the handle and the other hand on the front housing. Keep your hands, hair and other beloved body parts away
from the rotating components of the tool.
8. TURNING OFF THE TOOL. Turn off the tool, and unplug it from its electrical outlet before leaving. Do not
lay the tool down until it has come to a complete stop. Do not touch the bit or the workpiece immediately after
operation. They may be extremely hot and could burn your skin.
9. MAKING ADJUSTMENTS. Always turn off and unplug the impact wrench before making adjustments or
changing attachments. Accidental start-ups may occur if the tool is plugged in during adjustment or maintenance.
10. HOLD POWER TOOL BY INSULATED GRIPPING SURFACES, when performing an operation where
the fastener may contact hidden wiring or its own cord. Fasteners contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
6
Содержание 48107
Страница 12: ...EXPLODED VIEW PARTS LIST 12...
Страница 15: ......
Страница 16: ...THANKS FOR REMEMBERING...