background image

GENERAL SAFETY RULES

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving 
parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected 
and properly used. Use of dust collection can reduce dust-related hazards.

h) Always wear eye protection.

POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do 
the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any ad-
justments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting 
the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many 
accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the 
working conditions and the work to be performed. Use of the power tool for operations different from those 
intended could result in a hazardous situation.

SERVICE

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will 
ensure that the safety of the power tool is maintained.

CALIFORNIA PROPOSITION 65 WARNING

This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities 
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other re-
productive harm. Wash hands after handling. Some examples of these chemicals are:
 

• 

Lead from lead-based paints.

 

• 

Crystalline silica from bricks, cement, and other masonry products.

 

• 

Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies depending on how often you do this type of work. To reduce your exposure 
to these chemicals, work in a well-ventilated area with approved safety equipment such as dust masks specially de-
signed to filter out microscopic particles.

5

Содержание 48107

















Отзывы: