Wen 34027, Руководство пользователя

Страница: 7 / 26

SPECIFIC RULES FOR THE WOOD LATHE
12. PREVENTING ACCIDENTAL STARTING. Make sure the power switch is in the OFF position prior to
plugging in the machine. Always make sure the power switch is in the OFF position and the machine
is unplugged when doing any cleaning, assembly, setup operations, or when not in use.
13. Do not operate this tool until it is completely assembled and installed according to the instructions.
14. Remove scrap pieces and other objects from the table and work area before turning ON the lathe.
15. Rough cut the workpiece to the finished shape before attaching a workpiece to the faceplate. When
turning between centers, make sure the headstock and tailstock are tight and snug against the work-
piece.
12. DO NOT TOUCH MOVING PIECES. Keep hands away from the centers, tailstock, and headstock
during operation.
13. Never perform layout, assembly or set-up work on the table while the lathe is operating.
14. After turning off the lathe, wait until the centers, tailstock, and headstock come to a complete
stop before touching the workpiece.
15. Always turn off and unplug the machine before cleaning, making adjustments or changing attach-
ments. Accidental start-ups may occur if the tool is plugged in during an accessory change or adjust-
ment.
16. CLEANING. Never use solvents to clean plastic parts. Solvents could dissolve or otherwise dam-
age the material. Use only a soft damp cloth to clean plastic parts.
17. REPLACEMENTS. Should any component of your sander be missing/damaged or fail in any way,
shut off the switch and remove the plug from power supply outlet. Replace the missing, damaged, or
failed parts using only identical replacement parts before resuming operation.
CALIFORNIA PROPOSITION 65 WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects,
or other reproductive harm. Wash hands after handling. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area with approved safety equipment
such as dust masks specially designed to filter out microscopic particles.
These safety instructions can’t possibly warn of every scenario that may arise with this tool,
so always make sure to stay alert and use common sense during operation.
7