Weltem WPC-4000 Скачать руководство пользователя страница 8

8

9

Owner’s Manual

WPC-4000

Maintenance 

(Continued)

–  To ensure your product is covered by warranty, the complete faulty product along with your 

original purchase receipt must be provided at the place of purchase.

Product

Portable Air Conditioner

Model No.
Date of Purchase
Place of Purchase
Serial No.
Period of Warranty

Customer:

 Please read and keep this 

manual for future reference and keep 

sales receipt as proof of purchase.

SPRING REPLACEMENT 

(See Figure 11)

SELF-DIAGNOSTIC CODES 

(See Table 1)

The alarm light is activated if abnormal operation occurs, and a code is displayed on the control 

panel. The compressor and condenser fan motor will stop operating. The evaporator fan will con

-

tinue to run for 3 minutes. If the fault is rectified within 3 minutes, the unit will resume opera

-

tion. If the fault persists for more than 3 minutes, the evaporator fan also stops. The fault must 

be rectified before the unit can resume normal operation.

There are two springs on the rear of condensate water tank guide.

1. Release the screw on the spring hook.

2. Take off the spring hook, and then pull out the opposite spring

    hook from hole in the condensate water tank guide.

3. Replace with a new spring in reverse order.

4. Repeat this cycle for the other spring.

 

Figure 11 – The process of 

spring replaccement

Содержание WPC-4000













Отзывы: