7
Simple Media Platform Quick Installation Guide
V1.0-N
encoding 2 HDMI channels simultaneously. You can use a HDMI cable to connect the
HDMI source to the HDMI port of the module.
12.
DVB Scrambler Module:
Connect the RJ45 port with crossover Ethernet cable to the
CAS server. (You may need a switch to setup the connection.)
13.
MPEG2
to
MPEG4
Transcoder
/
MPEG4
to
MPEG2
Transcoder
Module:
Physical
connection
is
not
necessary
for
this
module.
14. Power:
There are two swappable power supply units (one for redundant), you can
connect them with two different power supply sources.
Connect this equipment only to the power sources that are identified on the
equipment-rating label normally located close to the power inlet connector(s).
Always pull on the plug or the connector to disconnect a cable. Never pull on the
cable itself.
To protect your valuable interests and services, equipping a UPS
(Uninterrupted Power Supply) and an AVR (Automated Voltage Regulator) to the
