25
Simple Media Platform Quick Installation Guide
V1.0-N
z
‘Input’ Setting of the IP I/O Module
The ‘Input’ setting menu is to set the IP input function for receiving multicast or unicast IP
stream.
Key Parameters:
Parameters
Description
ChannelSelect
IP I/O module support up to 64 channels input and 32 channels
output, each channel support up to 72 Mbps I/O data. In this
‘ChannelSelect’, user can select a specified channel to
configure its parameters.
Enable
On: enable the IP receiving function.
Off: disable the IP receiving function.
Note: this parameter setting applies to all channels.
Channel configuration
EnableChannel
Enable or disable corresponding input channel
SourceIPAddress
Set the IP address of the multicast/unicast that are going to
receive
SourcePort
Set port of multicast/unicast
Protocol
Select UDP/RTP for multicast/unicast
Gateway
Set
Gateway
of
the
IP
module
MAC
Address
MAC
address
of
the
IP
module
