4
Simple Media Platform Quick Installation Guide
V1.0-N
can use two RF cable to connect the module with cable source at the two signal input ports.
And if necessary, you can loop out the signal for other usage.
3. DVB-T/ISDB-T module:
The DVB-T / ISDB-T module supports receiving programs
compliant with DVB-T / ISDB-T standard from 4 different frequencies simultaneously. Similar
to DVB-S/S2, four ports on the module. Four cables can be used to connect the four RF
ports with the signal source.
4. ASI Module:
The ASI module is equipped with four BNC-type ASI connectors, supporting
four ASI inputs/outputs. The default setting of the module is: Ports 1 & 2 is for input, and
Ports 3 & 4 is for output. User can specify the port to be input or output at any time through
the NMS. According to your application, connect the four ports to the corresponding devices
(receive or send) with ASI cable.
5. GbE IP I/O Module
The IP module is equipped with two RJ45 connectors and two SFP
connectors. These two types of connectors can not be used simultaneously. For both the
RJ45 connectors or SFP connectors: the left one is for the IP stream input/output; The other
is for stream output only, and it is as the backup output when you set the left port as output
mode.
Connect the TS/IP port with the IP stream receiving or sending devices according to your
