3
Simple Media Platform Quick Installation Guide
V1.0-N
5.2 Wiring Connection
Before setting up the connection, please turn off the equipment and all other
connected external devices. The equipment and all connected external devices are
required grounded. Turn on the devices only after the wiring connection is completed.
Otherwise the device may be damaged.
There are three slots on the real panel of the unit. Each slot supports all types of the
modules which are developed for the platform.
After you have inserted all the modules to the unit, start to connect the DMP according to its
inserted modules and set up per the application requirement.
1. DVB-S/S2 module:
there are four RF ports on the module, each can be connected to one
transponder to receive a TS delivered from it. You can use four RF cables to connect the RF
ports to the antenna.
2. DVB-C module:
there are four RF ports on the module, within them, port 2 & 4 (marked
with
RF-IN 1/2 and RF-IN 3/4
) are signal input ports, and port 1 & 3 are loop out ports. You
