Well W52P страница 66 Скачать руководство пользователя

Страница: 66 / 162

User Guide W52P IP DECT Phone

Press the

Directory

soft key, and select the desired contact.

Press the

Call

soft key.

If both the office number and the mobile number of the contact are stored,

select the desired number and press or the

soft key to dial out.

When the second party answers the call, you can consult with him or her before

adding to the conference.

Press the

Conf.

soft key again to join all parties in the conference.

To join two calls in a conference:

Place two calls on the handset.

Select the desired call and make sure the call is active.

Press the

Options

soft key, and select

Conference

Two calls are joined in the conference.

To drop the conference call, press

or the

End

soft key.

Anonymous Call

You can use anonymous call feature to block the identity and phone number from

showing up to the called party when you call someone. For example, you want to call

to consult some service, but you do not want to be harassed. You can configure the

anonymous call feature on a per-line basis.

Note

To enable the anonymous call feature for a specific line:

Press to enter the main menu.

Select

Anonymous Call

The LCD screen displays the outgoing lines currently assigned to the handset. The

default outgoing line is highlighted and followed by a left arrow.

Press

to highlight the desired line, and press the

soft key.

Press

to select

Enabled

from the

Status

field.

Press the

soft key to accept the change.

To place an anonymous call:

Using the specific line on the handset to place a call.

The LCD screen of the phone receiving this call prompts an incoming call from

anonymity.

The anonymous call feature is not available on all servers. Contact your system
administrator for more information.

Содержание W52P



































































































































































Результаты поиска

Содержание W52P

Отзывы:

Похожие инструкции для W52P

Бренды по названию

Популярные бренды

Well W52P, Руководство пользователя

Результаты поиска

Содержание W52P

Отзывы:

Похожие инструкции для W52P

Бренды по названию

Популярные бренды