Well W52P Скачать руководство пользователя страница 38

Страница: 38 / 162

User Guide W52P IP DECT Phone

To configure the notification light:

Press to enter the main menu.

Select ->

Display

Notification Light

Press

to select the desired value from the

Voice Mail

field.

Enabled

is selected, the message key LED flashes red when the handset receives

a new voice mail.

Press

to select the desired value from the

Missed Call

field.

Enabled

is selected, the message key LED flashes red when the handset receives

a new missed call.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

Date and Time

The date and time display on the idle screen of your handset. By default, the handset

obtains the date and time from the Simple Network Time Protocol (SNTP) server. If your

handset cannot obtain the date and time from the SNTP server, you can configure the

date and time manually.

You can also configure the time format and date format respectively. The handset

supports two time formats (12 Hour or 24 Hour) and six date formats. The available date

formats are listed in the following table:

Date Format

Example

(2011-8-17)

d M,D

17 Aug,Wed

M d,D

Aug 17,Wed

D,d M

Wed,17 Aug

DD/MM/YYYY

17/08/2011

MM/DD/YYYY

08/17/2011

YYYY/MM/DD

2011/08/17

To configure the date and time manually:

Press to enter the main menu.

Select ->

Date & Time

Edit the current values in the

Date

and

Time

fields.

Press the

Save

soft key to accept the change.

The date and time that display on the LCD screen will change accordingly.

Содержание W52P



































































































































































Результаты поиска

Содержание W52P

Отзывы:

Well W52P, Руководство пользователя, Страница: 38 / 162

Результаты поиска

Содержание W52P

Отзывы: