Well W52P страница 63 Скачать руководство пользователя

Страница: 63 / 162

Call Features

Press

or to select the desired value from the

Tone

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

Note

To answer a new incoming call during a call:

If call waiting feature is enabled, a new incoming call can be answered during a call.

Press the

Accept

soft key to answer the new incoming call.

The original call is placed on hold.

Do Not Disturb (DND)

You can activate or deactivate the DND mode on a per-line basis. If DND mode is

activated for a specific line, all incoming calls to the line will be rejected automatically,

and the callers will hear a busy signal.

To activate DND mode for a specific line:

Press to enter the main menu.

Select

Do Not Disturb

The LCD screen displays the incoming lines currently assigned to the handset.

Press

to highlight the desired line, and press the

soft key.

Press

to select

Enabled

from the

Status

field.

Press the

soft key to accept the change.

The icon on the idle screen indicates the DND mode is activated. You can press the

Line

soft key when the handset is idle to check the line status. The icon in the bottom

of a line indicates that the DND mode is activated for this line.

The handset will reject all incoming calls to the line, and the LCD screen displays the

missed call icon followed by the number of missed calls.

Call

Call Forward

Forward

You can enable the call forward feature on a per-line basis. The handset will forward

incoming calls to the line to another party. There are three forwarding types:

Always Forward

: Incoming calls are immediately forwarded.

Busy Forward

: Incoming calls are immediately forwarded if the line is busy.

No Answer Forward

: Incoming calls are forwarded if not answered after a period of

time.

The call waiting tone works only if the call waiting feature is enabled.

Содержание W52P



































































































































































Результаты поиска

Содержание W52P

Отзывы:

Похожие инструкции для W52P

Бренды по названию

Популярные бренды

Well W52P, Руководство пользователя

Результаты поиска

Содержание W52P

Отзывы:

Похожие инструкции для W52P

Бренды по названию

Популярные бренды